category\default.php

Accessory for HB 710 / 720 bead & spray

Rezultati 1 - 19 od 19
Call sublayout: products_buehnen

Console HB 720

Console for the HB 720 series

  • Secure pick-up position
  • Fixed storage of the gun
  • Including pressure regulator

Workstation HB 720

For stationary use of HB 720 guns

  • Fixed mounting in the stand
  • Hands-free operation by means of the foot-operated switch
  • Pressure regulator included

Balancer for HB 700

for HB 700 / HB 710 for easier handling at the workplace

Spray nozzle set, Standard, Ø 1.5 mm

Spray nozzle set for HB 710 Spray

  • Set: Swirl nozzle and air cap
  • Diameter 1.5 mm
  • Thread: M10 x 0.75

Nozzle base, Standard

For the use of bead nozzles with an HB 710 and HB 720 Bead.

  • Direct mounting on the HB 710 / HB 720
  • Bead application
  • Thread: M10 x 1 on UNF ½ ″

Nozzle base for 3/8" nozzle

For the use of bead nozzles with an HB 710 and HB 720 Bead from the extended nozzle range with a 3/8" thread.

  • Direct mounting on the HB 710 / HB 720
  • Bead application
  • Thread: M10 x 1 on UNF 3/8"

Bead nozzle adaptor for spray devices

For the use of bead nozzles with an HB 710 Spray.

  • Direct mounting on the spray device
  • Bead application
  • Thread: M10 x 0.75 to UNF ½″

Wide slot nozzle

Wide slot nozzle for HB 710 Bead and HB 710 HT

  • Slot width: 0.2 mm
  • Film width: 16 or 30 mm
  • Thread: UNF ½″

Swirl nozzle for spray application

Swirl nozzle for HB 710 Spray

  • Diameter: 1.0 mm / 1.5 mm / 2.0 mm
  • Thread: U10 x 0.75

Air cap with adaptor for check valve

Air cap with borehole for HB 710 Spray

  • Incl. adaptor for check valve
  • Diameter 1.0 and 2.0 mm
  • Steel ball, compression spring and O-ring

Cone nozzle with capillary

Cone nozzle with capillary for HB 710 Bead and HB 710 HT

  • Exact dot application
  • Diameter: 0.7 mm
  • Non-drip

Flat nozzle 2-hole

Flat nozzle 2-hole for HB 710 Bead and HB 710 HT

  • Precise film application
  • Film width 10 mm
  • Thread: UNF ½″

Cone nozzle, Standard

Cone nozzle for HB 710 Bead and HB 710 HT

  • Bead application
  • Available Ø 0.8 mm / 1.0 mm / 1.5 mm / 2.0 mm
  • Thread: UNF ½″

Bead application nozzle for spray devices

This nozzle enables a bead application with the HB 710 Spray.

  • Direct mounting on the spray device
  • Bead application
  • Diameter 1.2 mm
  • Thread: M10 x 0.75

Round tubular nozzle

Round tubular nozzle for HB 710 Bead

  • Bead application
  • Available Ø 1.0 mm / 1.5 mm / 3.0 mm
  • Thread: UNF ½″

Cross rib for granulates

For use in the melting tank of the HB 710 series

  • Better melting performance
  • For granulates
  • Bead and spray version

Heat-resistant protective gloves

Safe handling of hot glue: particularly cut and puncture resistant

  • EN 388:2016, mechanical risks, 4X43E
  • EN 407:2004, thermal risks, X2XXX
  • DuPont™ Kevlar® fine knitted gloves
  • Medium latex coating on palm for a good grip

Silicone underlay

Mat made of durable and high-quality silicone. Due to the non-stick property of the silicone, the hot melt adhesive can be easily removed.