Application Heads

Application heads are used for automated operations. If material costs need to be reduced for larger quantities; the precision of a manual gun application is insufficient, available space do not allow for manual application or the adhesive application has to be monitored, then different types of application heads are used. They are then component parts (e.g. of a packaging machine) and are integrated into the master SPS control system. In the majority of cases, the application heads are integral and the work piece is positioned underneath them.

Rezultati 1 - 8 od 8
Call sublayout: products_buehnen

HB 20 BS Surface application head

The HB 20 BS is used to apply an adhesive film up to 20 mm wide.

  • Including 1 wide-slot module
  • PT100 sensor or Ni120
  • Air opening / Spring closing
  • Maximum application width 20 mm

HB 45 BS Surface application head

The HB 45 BS is used to apply an adhesive film up to 35 mm wide.

  • including 1 module
  • layer thickness from 0.1 to 2 mm
  • PT100 sensor (others available on request)
  • Air opening / Air closing for excellent tear-off behaviour
  • maximum application width of 10 mm to 35 mm

HB 11 Micro application head - Bead

With its narrow module, the HB 11 is used for particularly fast cycle times. The HB 11 is compatible with Nordson.

  • narrow
  • very fast
  • non-drip
  • one4all

HB 20 application head - Bead

The HB 20 is excellently suited for the application of highly viscous hot-melt adhesives.

  • Inexpensive
  • Bead and dot application
  • Application quantity can be precisely dosed
  • Energy-saving insulation

DK 1/30 HT application head - Bead

The use of high-quality seals makes temperatures of up to 250 °C possible.

  • High temperature version
  • Bead and dot application
  • Modular construction

HB 30 application head - Spray

The HB 30 Spray is used if spray widths of up to 50 mm are required

  • Spray application up to 50 mm
  • Incl. filter
  • 360 W

Spray application head with integrated air preheater

The spray width is 10 – 300 mm. The head contains and integrated filter.

  • Spray application up to 300 mm
  • Well suited for pressure-sensitive hot-melt adhesive
  • 480 W

FLK 2/60 Surface application head

With the FLK 2/60, the maximum application width is 60 mm.

  • including 2 modules
  • highest temperature up to 250 °C
  • PT100 sensor
  • Air opening / Air opening
  • maximum application width 60 mm