category\default.php

for Application Heads

Results 1 - 12 of 12
Call sublayout: products_buehnen

Nozzle cleaning needles (Pack of 6)

You can clean your nozzles with a nozzle cleaning set consisting of 6 needles.

  • Extends the useful life of nozzles
  • For bead and spray nozzles
  • For different bore diameters

Spacer plates BS20

The BS20 spacer plates are used in one4all surface application heads with BS20 modules.

  • Stainless steel
  • Layer thickness 0.15 to 0.5 mm
  • Application width 15 mm, 20 mm

Stainless steel nozzle VA-LL

  • Without inserted capillary
  • Good adhesive flow
  • Precise application
  • Thread: 3/8“ UNF
  • Compatible with Nordson (Series H200 / H400 / SolidBlue / MiniBlue) Robatech and ITW-Dynatec (Micro)

Pattern control system

Use of the pattern control system can save up to 30% hot melt adhesive, as the adhesive can be applied in a series of small dots or beads, instead of a single long bead.

  • Precise and consistent hot melt adhesive application
  • Intuitive operation via 7“ touch screen
  • High level of compatibility with all existing BÜHNEN application systems (tank systems and application heads)
  • Programming of up to 100 recipes

Brass nozzle MS-VA

Standard brass nozzle with inserted capillary made of stainless steel

  • Inserted capillary made of stainless steel
  • Capillary lengths: 2.5 mm and 3.0 mm
  • Compatible with Nordson (H200 / H400 / SolidBlue / MiniBlue series)
  • Compatible with Robatech, ITW- Dynatec (Micro)

Spray nozzle MS WIDE

Brass spray nozzle MS in the version with 12 bore holes.

  • 90° spraying angle
  • One-piece design, no union nut required
  • Self-sealing, no O-ring required
  • Thread: UNF 1/2" x 20
  • Compatible with Nordson H200CF series

Spray nozzle MS

Brass spray nozzle MS in the version with 7 bore holes.

  • 60° spraying angle
  • One-piece design, no union nut required
  • Self-sealing, no O-ring required
  • Thread: UNF 1/2" x 20
  • Compatible with Nordson H200CF series

Long nozzle, steel

Bead nozzle for HB 910 Bead and HB 950 Bead

  • Bead application
  • Available in Ø 0.6 mm – 3.0 mm
  • Thread: UNF 3/8″

Hot Melt Hoses for Application Heads - Spray

Hot melt hose for spray application heads in combination with melters.

  • Standard temperature sensor PT100
  • Up to 200 °C in the standard version
  • Lengths 1.2 m – 6.0 m

Hot Melt Hoses for Application Heads - Bead

Hot melt hose for bead application heads in combination with melters.

  • Standard temperature sensor PT100
  • Up to 200 °C in the standard version
  • Lengths 1.2 m – 6.0 m

Spacer plates

  • Stainless steel
  • Layer thickness 0.5 mm
  • Application width upon request

Adapter cable for temperature control box

Adapter cable for the spray application head with integrated air preheater

  • Temperature control box TRB-1
  • Length 3 - 7 m

Contact

for commercial requests

Surname(*)
Please type your full name.

Phone
Ungültige Eingabe

E-mail(*)
Bitte geben Sie in Mailadresse an.

Your message
Ungültige Eingabe