category\default.php

Accessory for HB 720 series

Results 1 - 15 of 15
Call sublayout: products_buehnen

Cartridge preheater K725

Cartridge preheater K 725 for 2 cartridges. Enables uninterrupted work with cartridge devices.

  • Heatable, PTFE-coated chambers
  • Very fast heating-up time: 20 minutes to 140 °C
  • Digital status display
  • Reduction of waiting time to increase productivity
  • Silicone-free

Console HB 720

Console for the HB 720 series

  • Secure pick-up position
  • Fixed storage of the gun
  • Including pressure regulator

Workstation HB 720

For stationary use of HB 720 guns

  • Fixed mounting in the stand
  • Hands-free operation by means of the foot-operated switch
  • Pressure regulator included

Nozzle kit, 1.5 mm

The nozzle kit is screwed directly onto the adhesive cartridge.

  • Bead application
  • Ø 1.5 mm
  • Thread: UNF 1/2″

Cartridge nozzle for high-viscosity adhesives

The nozzle kit is screwed directly onto the adhesive cartridge.

  • Bead application
  • For highly-viscous reactive adhesives
  • Without a ball

  • Nozzle kit, 3 mm

    The nozzle kit is screwed directly onto the adhesive cartridge.

    • Bead application
    • Ø 3.0 mm
    • Thread: UNF 7/16″

    Nozzle block Standard Spray

    The nozzle block on the HB 720 K Spray can be exchanged if required.

    • Spray application
    • Swirl nozzle 37°
    • Complete nozzle kit

    Nozzle block Standard

    The nozzle block on the HB 720 K Spray can be exchanged if required.

    • Bead application
    • Ø 3.0 mm
    • Complete nozzle kit

    Sika nozzle mandrel

    The Sika nozzle mandrel is a component/replacement part for the Sika nozzle block.

    • With spike
    • For SikaMelt® cartridges

    Nozzle block Sika, complete

    The Sika nozzle block is screwed directly onto the HB 720 K.

    • Bead application
    • Ø 3.0 mm
    • For SikaMelt® cartridges

    Spray nozzle set, Standard, Ø 1.5 mm

    Spray nozzle set for HB 710 Spray

    • Set: Swirl nozzle and air cap
    • Diameter 1.5 mm
    • Thread: M10 x 0.75

    Cartridge tongs

    Safe removal of hot aluminium cartridges

    • from the cartridge pre-warmer
    • from the HB 720 K Bead
    • from the HB 720 K Spray

    Balancer for HB 700

    for HB 700 / HB 710 for easier handling at the workplace

    Heat-resistant protective gloves

    Safe handling of hot glue: particularly cut and puncture resistant

    • EN 388:2016, mechanical risks, 4X43E
    • EN 407:2004, thermal risks, X2XXX
    • DuPont™ Kevlar® fine knitted gloves
    • Medium latex coating on palm for a good grip

    Silicone underlay

    Mat made of durable and high-quality silicone. Due to the non-stick property of the silicone, the hot melt adhesive can be easily removed.