category\default.php

HB 4000 connect

HB 4000 connect – The modern melting devices based on the modular principle

The HB 4000 connect melters can be precisely tailored to the individual requirements of a wide variety of production areas. The 7” home screen has a clear menu structure that enables intuitive operation. The solution based on the modular principle impresses with its efficiency and cost-effectiveness. The components used are from well-known manufacturers. Proven industrial electronics from Lenze, Siemens, Festo and Weidmüller are installed in this series.

Melters with standard pressure sensor

Repeatable work processes require a consistent supply of adhesive. The new HB 4000 Connect series already has the necessary pressure sensor installed as standard.

Always under control: dosing meter

All our melters can be controlled, thanks to the built-in dosing meter function (g/m - g/sec - g/m²).

Pressure and speed display

Electronic pressure control and speed display can be controlled and read via the touchscreen.

Fully equipped, including weekly timer

Basic equipment includes weekly timer, operating hours counter, recipe menu, user administration and password.

Results 1 - 12 of 12
Call sublayout: products_buehnen

HB 4006 connect

The melter has a 4-litre non-stick melt tank with a buffer volume. This enables uninterrupted operation when refilling adhesive. The HB 4006 connect can be configured with up to two gear pumps. The hermetically sealable system is suitable for processing PUR or POR hot-melt adhesives.

HB 4022 connect

The melter has a 22-litre non-stick melt tank with a buffer volume. This enables uninterrupted operation when refilling adhesive. The HB 4022 connect can be configured with up to two gear pumps. The hermetically sealable system is suitable for processing PUR or POR hot-melt adhesives.

HB 4070 connect

The melter has a 7-litre stainless steel tank and enables gentle melting of PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Optionally available as a high-temperature version.

HB 4100 connect

EVA, PSA and PO hot-melt adhesives can be heated up quickly in the 10-liter tank. The adhesives can be processed gently in the form of granules, blocks or pillows. The modern 7”colour touch display enables intuitive operation of the melter.

HB 4110 connect

Heated hot-melt adhesive applicator with a 110-litre aluminium storage tank. Gear pump sizes from 10 to 300 kg/h can be used. Suitable for processing EVA, PO, PA and pressure-sensitive hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Optionally available as a high-temperature version up to 230 °C.

HB 4130 connect

Heated hot-melt adhesive applicator with a 110-litre aluminium storage tank. Gear pump sizes from 10 to 300 kg/h can be used. Suitable for processing EVA, PO, PA and pressure-sensitive hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Optionally available as a high-temperature version up to 230 °C.

HB 4150 connect

Heated hot-melt adhesive applicator with a 15-litre stainless steel storage tank. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Suitable for processing PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Optionally available as a high-temperature version up to 230 °C.

HB 4200 connect

The 20-litre melter enables gentle melting of hot-melts in the normal temperature range. The hot-melt adhesive is conveyed by means of a gear pump. The system can be equipped with one or two pumps. All information is clearly displayed on the touch screen.

HB 4250 connect

Heated hot-melt adhesive applicator with a 25-litre stainless steel storage tank. The use of two different tank materials with different thermal conductivity protects the hot-melt adhesive from thermal stress. Suitable for processing, among other things, PA hot-melt adhesives in the form of granules, pillows or blocks up to 200 °C. Also optionally available as a high-temperature version up to 230 °C.

HB 4450 connect

Heated hot-melt adhesive applicator with a 45-litre aluminium storage tank. Suitable for processing, among other things, EVA, PO, PA and pressure-sensitive hot-melt adhesives in the form of granulates, pillows or blocks up to 200 °C. Optionally available as a high-temperature version up to 230 °C.

HB 4650 connect

The melter with the 65-litre tank is compact in design and easy to maintain. The large-volume device filter has a long service life. The filter block is made of high-strength aluminium. Due to the possibility of using different gear pumps, the individual production conditions can be addressed. Optionally available as a high-temperature version up to 230 °C.

HB 4800 connect

Blocks, large pillows and large quantities of granules can be melted in the 80-litre stainless steel melting tank. Up to two gear pumps can be installed and enable a delivery rate of 160 kg/h. The adhesive conveyance by means of a precision gear pump and a special maintenance-free AC/converter drive, as well as a start-up safeguard and a temperature reduction as a “standby” function, ensure maximum operating efficiency. Optionally available as a high-temperature version up to 230 °C.

SUBLAYOUTS/categories.php

Contact

for commercial requests

Surname(*)
Please type your full name.

Phone
Ungültige Eingabe

E-mail(*)
Bitte geben Sie in Mailadresse an.

Your message
Ungültige Eingabe