Hot Melt Hoses RB
Advantages and equipment features
Hot melt hoses for bead application heads in combinations with melters.
- Compatible with Robatech Serie Concept
- High-Flex version
- Up to 210 °C in the standard version
- Lengths 0.6 m – 8.0 m
Specifications
Length
0.6 – 8.0 m
Operating Voltage
230 V
Temperature sensors
NTC
Operating temperature
> 210 °C
Application Areas
Description
The NS30 hotmelt hoses serve as a heated and flexible transport route for hot-melt adhesive from a melter to a bead application head.
The hoses are available in different lengths and nominal widths (=diameter of the hose inner core). Should you not find the length you require here, please contact us.
Standard: NTC sensor, nominal width NW08, High-Flex version, Harting plug (rectangular) HTS 8-pin
Optional: Spray version, exchangeable inner liner (recommended for applications with PUR or PO), VA sheathing (in the case of extreme stresses on the outer sheath.), outer sheath in signal colour (orange), splash water protection IP65
| Article number | Description | Remarks | Reference number |
| RKT0561 | Hose RB, NW08 | 0,6 m | 100781 |
| RKT0300 | Hose RB, NW08 | 1,0 m | 100782 |
| RKT0353 | Hose RB, NW08 | 1,2 m | 100658 |
| RKT0301 | Hose RB, NW08 | 1,5 m | 100657 |
| RKT0721 | Hose RB, NW08 | 1,8 m | 100783 |
| RKT0302 | Hose RB, NW08 | 2,0 m | 100784 |
| RKT0303 | Hose RB, NW08 | 2,5 m | 100785 |
| RKT0304 | Hose RB, NW08 | 3,0 m | 100786 |
| RKT0306 | Hose RB, NW08 | 5,0 m | |
| RKT0620 | Hose RB, NW08 | 6,0 m | 104515 |
| RKT0329 | Hose RB, NW08 | 8,0 m | 104517 |
Stainless steel nozzle VA-LL