category\default.php

Compatible Hotmelt Nozzles

Nozzles for dot, bead or spray application: BÜHNEN high-precision nozzles set new standards for the most applications. Our nozzles are produced with very low tolerance parameters, which ensures exact bead placement and an even spray or slot coating application of hot melt adhesives.

The nozzles are ideally suited for their specified use and ensure a controlled flow of hot melts, as well as a uniform bead size and ideal tear behavior.

Results 1 - 11 of 11
Call sublayout: products_buehnen

material nozzle B34S

The main body of the one4all spray nozzle B34S is made of stainless steel.

  • Compatible with Nordson and Meltex EP34S
  • Diameters from 0.6 to 1.0 mm available

Multi-bore nozzle, 2 bore holes

The one4all 2B multi-bore nozzles are available with 2 bore holes for bead application.

  • Compatible with Nordson H200 / H400 / SolidBlue / MiniBlue
  • Compatible with Robatech and ITW-Dynatec (Micro)
  • Suitable for BÜHNEN
  • Different diameters for dot and bead application

Spacer plates BS20

The BS20 spacer plates are used in one4all surface application heads with BS20 modules.

  • Stainless steel
  • Layer thickness 0.15 to 0.5 mm
  • Application width 15 mm, 20 mm

Stainless steel nozzle VA-LL

  • Without inserted capillary
  • Good adhesive flow
  • Precise application
  • Thread: 3/8“ UNF
  • Compatible with Nordson (Series H200 / H400 / SolidBlue / MiniBlue) Robatech and ITW-Dynatec (Micro)

Collar nozzle, stainless steel

The one4all collar nozzle is made of stainless steel and reduces the thread tension during application.

  • Compatible with Nordson, Robatech, ITW-Dynatec and BÜHNEN
  • For dot and bead application
  • Available in diameters from 0.4 to 0.8 mm

Brass nozzle MS-VA

Standard brass nozzle with inserted capillary made of stainless steel

  • Inserted capillary made of stainless steel
  • Capillary lengths: 2.5 mm and 3.0 mm
  • Compatible with Nordson (H200 / H400 / SolidBlue / MiniBlue series)
  • Compatible with Robatech, ITW- Dynatec (Micro)

Angle nozzle 90°, 1 - 2 bore holes

The one4all angle nozzles are available with one or two bore holes for bead application.

  • Compatible with Nordson H200 / H400 / SolidBlue / MiniBlue
  • Compatible with Robatech and ITW-Dynatec (Micro)
  • Suitable for BÜHNEN

Different diameters for dot and bead application

Spray nozzle MS

Brass spray nozzle MS in the version with 7 bore holes.

  • 60° spraying angle
  • One-piece design, no union nut required
  • Self-sealing, no O-ring required
  • Thread: UNF 1/2" x 20
  • Compatible with Nordson H200CF series

Spray nozzle MS WIDE

Brass spray nozzle MS in the version with 12 bore holes.

  • 90° spraying angle
  • One-piece design, no union nut required
  • Self-sealing, no O-ring required
  • Thread: UNF 1/2" x 20
  • Compatible with Nordson H200CF series

Spacer plates

  • Stainless steel
  • Layer thickness 0.5 mm
  • Application width upon request

Nozzle cleaning needles (Pack of 6)

You can clean your nozzles with a nozzle cleaning set consisting of 6 needles.

  • Extends the useful life of nozzles
  • For bead and spray nozzles
  • For different bore diameters